__________________________

Products/Items Used:

- Flourish White Tiger Lily Carpet

- Bazzill Hillary & Parakeet

- Bazzill Leapfrog Brads

- Kromekote Gold Card

- Metallic Ice Gold Card

- Cover Board

- Daisy D's Rub On - Beautiful

- Bo Bunny Rub On - Spring Jewels

- UTEE - Clear & Gold

- Clear Embossing Pad

- Ranger Acrylic Dabber - Lettuce

- Stamp-It Assorted Ribbons

__________________________

Instructions

1. Trim White Tiger Lily Carpet and layer onto Bazzill Hillary Card.

2. Cut a 1-1/2cm right angled piece of Cover Board for left bottom corner and paint with Lettuce Dabber. Once dry lightly apply Clear Embossing Pad and sprinkle with one layer of clear UTEE, heat. Reheat small areas and sprinkle with Gold UTEE. Tie with assorted Ribbons and add a Leapfrog Brad to the corner and each end of the Ribbons.

3. Layer your photo onto Ice Gold Card followed by a thin border of Kromekote Gold, this is then mounted onto Cover Board then layer again onto Parakeet, Gold, Hillary and Gold. Cut a strip of Hillary adding a piece of Gold Edged Ribbon, fold under the ends and thinly layer onto Gold Kromekote Card. Attach to the back of your mounted photo and position Brads at the ends of the strip. Add a Flourish corner rub-on to your photo from Bo Bunny's Spring Jewels.

4. Add the 'Beautiful' rub-on and your project is complete.

'Lpve' Wall Hanging by Elaine Berkhout

__________________________

Products/Items Used:

- Flourish Roses 9UP

- Bazzill Bling - Sugar Daddy

- Bazzill - Adobe, Casa, Java

- Kromekote Gold

- Cover Board

- Flourish Alpha Mix - Black

- UTEE - Clear & Gold

- Silver Pearl Embossing Powder

- Clear Embossing Pad

- Acrylic Paint Dabbers - Snow White, Mushroom & Espresso

- Distress Pad - Tattered Rose

- Metallic Rub-Ons - Kit 3

- Glossy Accents Two-Tone Grossgrain Ribbon - Brown/Black

- Piece of Dowel

__________________________

Instructions

1. Mount photo onto Cover Board, finishing edges with either a brown Le Plume Pen or sponge with Coffee Archival ink pad. Layer onto Sugar Daddy, Gold, Adobe, Gold, Casa and Java Cards. Choose 8 out of the Flourish 9UP Roses you wish to use. Cut corner images down to 8.2 x 8.2cm and centre edge images down to 8.2 x 6.2cm, position images and cut out inside outer corners as per sample, mount onto Cover Board and finish edges as above. Layer onto Sugar Daddy, Gold, Casa and Gold Cards. On the final layer of each piece cut out an extra piece of Cover Board which will be used to finish off the back of your hanging.

2. Using the Cover Board cut out a 26cm square x 1cm wide frame, paint with Snow White Dabber, once dry sponge lightly with Tattered Rose Distress ink pad. Apply one layer of clear UTEE and heat, whilst still hot sprinkle in some Silver Pearl Embossing Powder and heat.

3. Choose your letters from the Alpha Mmix range and paint with Dabbers, I have mixed Espresso and Mushroom together, once dry apply Metallic Rub-Ons followed by one coat of clear UTEE, whilst still hot randomly sprinkle with Gold UTEE. The piece of dowel for the top of the hanging has been prepared in the same way.

__________________________

Assemblage

1. Position and line up the outer pieces, attach Cover Board frame with Glossy Accents, once dry turn over and position photo in the centre. Attach Ribbon - a piece across the top and bottom (under the frame) and one across the centre (which will hold the photo in place). The vertical pieces of Ribbon are attached at each side under the frame and two positioned as per the sample either side of the centre.

2. All vertical Ribbons have a loop created at the top to hold the rod for hanging. Attach spare Cover Board pieces to the back of each piece to finish off. Thread dowel through the top and attach ribbon ready for hanging.